Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
ДЛЯ ОБНОВЛЕНИЯ
ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО
Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.
- НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
- НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
- Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.
Примечание: Конфигурационные файлы могут быть некорректно установлены на новые версии встроенного ПО, требующие сброса на заводские настройки.
Рекомендации по обновлению ПО: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, Усилитель Wi-Fi сигнала
TL-WA854RE(EU)_V3_200420 |
---|
Дата публикации: 2020-05-25 | Язык: Многоязычный | Размер файла: 4.16 MB |
Изменения и исправленные ошибки: 1. Улучшена стабильность устройства. 2. Повышена безопасность устройства. Примечания: 1. Для TL-WA854RE V3. |
|
TL-WA854RE (EU)_V3_191216 |
---|
Дата публикации: 2020-01-06 | Язык: Многоязычный | Размер файла: 3.66 MB |
Новые функции/Улучшения: 1. Повышена стабильность Wi-Fi. 2. Оптимизирован механизм получения IP-адреса. 3. Добавлена ручная настройка DHCP в веб-интерфейсе. |
|
TL-WA854RE(RU)_V3_190801 |
---|
Дата публикации: 2019-08-30 | Язык: Многоязычный | Размер файла: 4.16 MB |
Исправления и улучшения: 1. Оптимизирована функция авторизации; 2. Оптимизировано отображение работы DNS; 3. Улучшена стабильность устройства; Примечания: 1. Для TL-WA850RE V6.0 |
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
RE650(US)_V1_190521 |
---|
Published Date: 2019-05-30 | Language: Multi-language | File Size: 6.83 MB |
Modifications: 1.Fixed CVE-2019-7406 discovered by IBM to increase security. |
|
RE650(US)_V1_180719 |
---|
Published Date: 2018-08-10 | Language: Multi-language | File Size: 6.83 MB |
Modifications and Bug Fixes: 1. Fixed the DNS resolution issue under specific situation. 2. Fixed the bug that cannot access the web interface page when working on AP mode and under specific situation. 3. Fixed the connection compatibility issue with specific models of routers. Notes: 1. For RE650(EU/UK/US/AU/JP/CA/AS) V1. |
|
RE650(US)_V1_171228 |
---|
Published Date: 2018-03-16 | Language: Multi-language | File Size: 6.82MB |
New Features/Enhancements: Improved the compatibility with Tether APP. Bug Fixes: Fixed the compatible issue with TIM Modem router. |
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
RE350(US)_V1_190516 |
---|
Published Date: 2019-05-30 | Language: Multi-language | File Size: 5.44 MB |
Modifications: 1.Fixed CVE-2019-7406 discovered by IBM to increase security. |
|
RE350(US)_V1_171214 |
---|
Published Date: 2017-12-20 | Language: Multi-language | File Size: 5.45MB |
Modifications and Bug Fixes: New Features/Enhancements: Improved Online detection method and reduced unnecessary data traffic. |
|
RE350(US)_V1_171121 |
---|
Published Date: 2017-11-21 | Language: Multi-language | File Size: 5.44 MB |
Modifications and Bug Fixes: Bug fixes: Fixed the WPA2 Security (KRACKs) Vulnerability. |
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
RE650(UK)_V1_190521 |
---|
Published Date: 2019-05-30 | Language: Multi-language | File Size: 6.83 MB |
Modifications: 1.Fixed CVE-2019-7406 discovered by IBM to increase security. |
|
RE650(UK)_V1_180719 |
---|
Published Date: 2018-08-10 | Language: Multi-language | File Size: 6.83 MB |
Modifications and Bug Fixes: 1. Fixed the DNS resolution issue under specific situation. 2. Fixed the bug that cannot access the web interface page when working on AP mode and under specific situation. 3. Fixed the connection compatibility issue with specific models of routers. Notes: 1. For RE650(EU/UK/US/AU/JP/CA/AS) V1. |
|
RE650(UK)_V1_171228 |
---|
Published Date: 2018-03-16 | Language: English | File Size: 6.82MB |
New Features/Enhancements: Improved the compatibility with Tether APP. Bug Fixes: Fixed the compatible issue with TIM Modem router. |
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
Archer A9(US)_V6_200416 |
---|
Published Date: 2020-04-26 | Language: English | File Size: 15.18 MB |
New features/Enhancements: 1. Improved wireless experience. For Archer A9 (US) V6.0 |
|
Archer A9(US)_V6_200114 |
---|
Published Date: 2020-03-23 | Language: Multi-language | File Size: 15.18 MB |
New features/Enhancements: 1. Added WPA3 encryption support. 2. Added GDPR support. 3. Improved SmartConnect mechanism. |
|
Archer A9(US)_V6_190515 |
---|
Published Date: 2019-05-17 | Language: Multi-language | File Size: 15.76 MB |
Enhancements: Improved the performance and stability of the device. |
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.